P256 EURO GAUGE SAFETY PATTERN TYPE OVERPRESSURE PROTECTION PRESSURE GAUGE

P256 Abbildung kann vom Original abweichen
Hersteller WISE-CONTROL

P256 EURO GAUGE SAFETY PATTERN TYPE OVERPRESSURE PROTECTION PRESSURE GAUGE



Preloader

Datasheet: P542_P543.pdf

P256 series are made with a solid plate wall and a blow-out back. Its stainless steel case and cover have a good appearance. It has the excellent proof against corrosion and chemical attack. Suitable for protection against damage to the measuring element when high overpressure is applied to the gauge instantaneously. Max overpressure is up to 4 times of measuring range.

 

Nominal diameter: 100 and 160mm

 

Accuracy: ±1.0% of measuring range

 

Scale range (MPa, kPa, bar): -0.1 ~ 0 to 0 ~ 4 MPa

 

Working pressure

              Steady : 100% of full scale

               Over range protection : 4 times the measuring range

 

Working temperature (Dry type)

         Ambient : -40 ~ 65℃

                           -20 ~ 65℃ (With glycerin filling)

                           -40 ~ 65℃ (With silicone filling)

         Fluid : Max. 200℃ Max. 100℃ (With glycerin filling)

                    Max. 100℃ (With silicone filling)

 

Degree of protection: EN60529/IEC529/IP67

 

Temperature effect: Accuracy at temperature above and below the reference temperature (20℃) will be effected by approximately ±0.4% per 10℃ of full scale

Alle Funktionen und technischen Daten können ohne Ankündigung geändert werden, Lieferung vorbehaltlich Verfügbarkeit,Korrektur von Irrtümern und Auslassungen vorbehalten.

Es gibt noch keine Rezensionen für dieses Produkt.