Abbildung kann vom Original abweichen
R920 EXPLOSION PROOF RS SERIES
Abbildung kann vom Original abweichen
Hersteller WISE-CONTROL
Generally, sheathed type temperature sensors are used with thermowell. To maximize the heat-transfer between sheath junction and thermowell, the sheath must be inserted as close as possible to the bottom of the well. However, it is not always possible to determine the actual distance between the end tip of the sheath and the bottom of the thermowell. Furthemore, heat expansion can damage the sheath which is located inside the thermowell. To prevent this uncertainty and the damage to the sheath, RS series employ the spring load type sheath. This spring load absorbs the impact to the sheath, and protects the sheath from the vibration. Moreover, it is designed to be used in an explosive area.
Beschreibung
Generally, sheathed type temperature sensors are used with thermowell. To maximize the heat-transfer between sheath junction and thermowell, the sheath must be inserted as close as possible to the bottom of the well. However, it is not always possible to determine the actual distance between the end tip of the sheath and the bottom of the thermowell. Furthemore, heat expansion can damage the sheath which is located inside the thermowell. To prevent this uncertainty and the damage to the sheath, RS series employ the spring load type sheath. This spring load absorbs the impact to the sheath, and protects the sheath from the vibration. Moreover, it is designed to be used in an explosive area.
| Element | Thermocouple : K, E, J, T, N R.T.D. : Pt 100 Ω at 0 ℃ TCR : 3,850 ppm/k |
| Tolerances on temperature reading | ■ Thermocouple Class 1, Class 2 (DIN/IEC584-2, BS/EN60584-2, JIS C1602) Special, Standard (ASTM E230 E988 ISA-MC96.1) ■ R.T.D. Class A : ± (0.15 + 0.002 l t l) Class B : ± (0.3 + 0.005 l t l) |
| Head material | ALDC (Standard) 316SS |
| Sheath outer diameters | ■ Thermocouple 1.0, 1.6, 2.3, 3.2, 4.8, 6.4, 8.0, 9.5 and 12.7 mm * Double elements is not available for 1.0 and 1.6 mm sheath outer diameters ■ R.T.D. 3.2, 4.8, 6.4 and 8.0 mm |
| Certificates | KCS Ex d IIC T6 IP65 |
| Degree of protection | EN60529/IEC529/IP66 EN60529/IEC529/IP67 |
| Hersteller |  |
Alle Funktionen und technischen Daten können ohne Ankündigung geändert werden, Lieferung vorbehaltlich Verfügbarkeit,Korrektur von Irrtümern und Auslassungen vorbehalten.
Kundenrezensionen
Es gibt noch keine Rezensionen für dieses Produkt.
