F770 WEDGEMETER

Abbildung kann vom Original abweichen
Hersteller WISE-CONTROL

The flow element consists of a body and wedge flow restriction. This restriction creates a differential pressure in proportion to the square of the volumetric flow rate. The wedge restriction has no critical surface dimensions, or sharp edges, that will affect measurement accuracy as the result of normally expected wear.


Preloader

The flow element consists of a body and wedge flow restriction. This restriction creates a differential pressure in proportion to the square of the volumetric flow rate. The wedge restriction has no critical surface dimensions, or sharp edges, that will affect measurement accuracy as the result of normally expected wear.

Advantages ■ Bi-directional flow
■ High accuracy ±0.5 % of actual flow rate
■ Low reynolds number measurement, Rd500
■ Minimum upstream and downstream pipe measurement
Measuring fluid Liquid, Gas and steam
Material 304SS, 316SS, 316L SS and Carbon steel
Special materials are available
Pipe size 0.5" ~ 24"
Wedge element standard H/D ratios 0.2, 0.3, 0.4, 0.5, 0.6 and 0.7
Accuracy ● Calibrated
1" or larger : ±0.5 % of actual flow when operated within the calibrated range
0.5" : ±0.75 % of actual flow when operated within the calibrated range
● Uncalibrated :
±5 % of actual flow when using nominal Kd²from sizing program. Applies to bi-directional flow
● Bi-directional :
Same as above when Kd² designated as reverse flow coefficient
Repeatability ±0.2 %
Rangeability 0,417361111111111
Hersteller Wise Control Inc.

Datenblatt: F770.pdf

Alle Funktionen und technischen Daten können ohne Ankündigung geändert werden, Lieferung vorbehaltlich Verfügbarkeit,Korrektur von Irrtümern und Auslassungen vorbehalten.

Es gibt noch keine Rezensionen für dieses Produkt.

Experten Beratung

Telefon:
040 609 448 990
Öffnungszeiten:
Mo. - Fr.
09 Uhr - 12 Uhr
13 Uhr - 17 Uhr
Email:
Diese Webseite verwendet Cookies. Durch die Benutzung dieser Seite stimmen Sie dem zu.