Beschreibung

P542 and P543 series are designed for a local reading of measured pressure and equipped with the electrical contact block which allows all the combinations of contacts to be used. The contact block is mounted on the dial. The window is fitted with a knob for external adjustment of the set points. These are also designed to direct the leakage of insulating oil inside the electric cable.

Nominal diameter	100 and 150 mm
Accuracy	±1.0 % of full scale
Scale range (MPa, kPa, bar)	-0.1 ~ 0.6 MPa to -0.1 ~ 1 MPa -0.1 ~ 0.3 MPa
Working pressure	Steady : 75 % of full scale value Over range protection : 130% of full scale
Working temperature	Ambient : -40 ~ 65 °C Fluid : Max. 100 °C
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale
Pressure connection	Stainless steel (316SS) Threaded entry, radial
Element	Stainless steel (316SS) C type bourdon tube
Case	Nickel plated zinc for 100 mm (P542) Triple setpoint only 316SS 100 and 150 mm (P543)
Cover	Nickel plated zinc for 100 mm Triple setpoint only 316SS 150 mm (P543)
Window	Safety glass
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	BsT3 alloy, black painted pointer with gold plated
Contact	Contact : Dual set point or triple set point Contact rating : AC 110 V, 0.5 A/AC 220 V, 0.25 A Dielectric strength : AC 2,000 V/min insulation Insulation resistance : More than 100 MΩ at DC 500 V
Process connection	⅜" PF
Hersteller

Datenblatt:

Alle Funktionen und technischen Daten können ohne Ankündigung geändert werden, Lieferung vorbehaltlich Verfügbarkeit,Korrektur von Irrtümern und Auslassungen vorbehalten.